How to Avoid Common Mistakes when Installing Metal Roofing

When selecting a metal roofing material and installing the panels on your home, there are many common mistakes that are easily made. Pay close attention to how you install your metal roof panels and be sure to consult this list thoroughly prior to beginning.

Metal Roof Installation

Incorrect Panel Lapping

Installing panels the wrong way is a common mistake that many first-time roofing installers make. Remember, to consult the material supplier on how to install panels correctly. Good suppliers will have video tutorials and printed documentation on installation of their product.

Screwing a Set Incorrectly

Every screw needs to be set correctly. The last thing you want is for them to be too tight or too loose. Always put screws where it is flat in the middle of the panel. If they’re wobbling, check to make sure that your nut driver is in proper working condition.

Don’t use Too Much Sealant

Don’t use sealant or caulk to fix a mistake on your roof. The goal needs to be to waterproof through correct installation and not by covering lazy mistakes with caulk. Any sealant should be a secondary consideration when it comes to waterproofing. When applied, it needs to be under panel or trim where it is protected from the elements because it will last longer there.

Always Measure any Panel Twice prior to Cutting

After a metal roof panel is cut, it can’t be put back together again. The last thing you want to do is measure wrong. Always ensure that you check twice, and then cut. This will keep errors to a minimum at least as it pertains to cutting. Also, ensure you are adequately planning for any penetrations i.e. skylights, attic fans, PVC piping, etc. These require special attention to properly trim and install around these openings.

Assuming Installation is the same for Every Metal Roof

Though some may be similar, always check the instructions prior to installing any metal roof. Depending on the type of panels, special attention may need to be applied to certain areas. Remember, there are varying thicknesses, finishes, and profiles. These factors in addition to the style of the property will be what determines installation.

Over the Edge Paneling is a No-No

Don’t let the metal panel hang over the edge of the roof. Though many may attempt to do otherwise, when you are properly installing a metal roof, it is recommended to ensure paneling only hangs an inch and a half to two inches extending over the edge.

Not enough Screws in your Pipe Flashing

Any penetration in the roof is an area prone to leaking. Pay close attention to how you address penetrations like PVC piping. By only laying in a couple screws and some caulk, that’s not enough to get the job done long-term. The caulk will eventually wear out and then, you’ll have a leak in no time. When installing, ensure sealant is installed underneath the base and that enough screws are placed into the base to keep it in place.

Installing a metal roof is a big project for anyone. Be sure to avoid these common mistakes that have befallen others in the past. Be highly attentive when installing metal roofing as even a minor mistake can require significant re-installation or long-term costs down the line when a leak becomes present.

Pros and Cons of Steel Roofing Installation

Steel roofing is becoming more and more popular for residential homes across North America. These new roofs look great but in large part, there’s still a pretty sizeable percentage of homeowners who don’t know much about steel roofing. As a professional roofing contractor, we want to highlight some of the pros and cons of steel roofing, to help you decide if it’s right for you.

Steel Roofing Pros

Metal roofs have a long life span, with some warranties extending to as high as 20 to 50 years. Resistant to wind, fire, insects, mildew, and deterioration, a metal or steel roof does need to be properly installed though.

The weight of a metal roof is significantly less heavy than a conventional roof. This makes installing on an older house easy because you know it’s not going to require much structural support.

For those of us living in regions where the snow and ice come heavy during winter, metal roofing has a smooth finish allowing that stuff to glide right off. Unlike a traditional asphalt roof, there is no absorption in the material and your steel will be kept near to brand new for a long time.

Metal or steel roofs are also very environmentally friendly. They are easily recycled at the end of their life span.

Most metal roofs can be installed quickly and safely by any trained roofing contractor. Due to the nature of them being easy to install and keeping in mind the interlocking design, it makes it more difficult for a leak to become present. Also, because they are metal and non-combustible, that makes them fireproof as well.

Steel Roofing Cons

The biggest con to steel roofing is likely the upfront cost which is higher than what one would pay for traditional shingles. Depending on the type and look of the metal, it can get costly.

That said, the difference is almost always recouped over time as steel and metal roofs last longer than their asphalt counterparts.

There are a number of other things to consider when it comes to steel roofing, such as being susceptible to scratching or denting when walking on it improperly (we can teach our customers on how to walk on their roof in order to avoid damage). As a material, metal is also more sensitive to temperature expansion and contraction, however properly installed metal panels will compensate for that .

Conclusion

Steel roofing is a newer, premium product that is worth considering for anyone looking to update their property. There are many factors to weigh, yes, however if one can cover the initial cost of material and installation, in the long-term they will be mighty thankful they did.

It’s a big investment installing a steel roof on your home but doing so will provide you with something that is built to last. For more information on what steel roofing type may be right for your property, contact a local professional roofing contractor to advise you.

How to Hire the Best Roofing Contractor for your Property

Experience does not necessarily guarantee expertise. Roofing contractors with years of experience can neglect key aspects of a job. It is up to the homeowner to know what to look for when hiring a roofing contractor for their property. Beyond the claims that they may make, they need to be able to back it up with indications that they are the one to trust with your property.

hire roofing contractor

Roofing contractors are usually hired to perform a complete roof installation or oftentimes to address a leak. Though there are typical routes to performing both of these, the importance is in the details. Any roof can be different and it’s important to conduct a thorough inspection prior to pursuing any work. For example, if your roof has already let enough water in to cause rot and mold, the repairs may be pretty extensive. You’re going to want someone you can trust, that is affordable, and who knows what they’re doing. Here’s where to start.

Consider his Professional Demeanor

Any roofer should conduct themselves in the estimate stage in a courteous, professional manner. They should show up on time, provide a written quote with details of the work they are setting out to do, and he should not appear disorganized.

Ensure the Contractor does a Thorough Inspection

Any estimator worth their title should have gone a pretty extensive inspection prior to handing over any quote. If a roofing contractor is just taking a look from the ground, that’s generally a bad sign.

Did they Explain the Options you Have – they Should!

Any roofing problem may have multiple solutions to offer. A roofing contractor should be willing to explain to you the different options available. There are many different installation methods, roofing products, and roof systems. They may be able to recommend something less expensive or a more permanent fix than what other contractors may give you.

Consider what will happen to the Waste

Ripping apart an old roof is a very messy job. If care is not taken, it can leave damage to landscaping, lawns, decks, siding, and more. During the estimation stages, don’t hesitate to ask about things like how the contractor intends to get rid of the waste as well as site protection.

Choose us to get the Job Done right – No matter how Tough it is

To trust a roofing contractor to install a roof on your property, they should be able to pass these four tests with flying colors.

As a homeowner, you’re essentially at the mercy of your roofing contractor. If they install or repair incorrectly, or provide just a temporary fix, they will be long gone before something turns up years down the line. All the while, you’re going to be hoping you hired the right company.

This is why the early stages of building a relationship with a roofing contractor is important. Mold, rot, and undetected leaks can mean some very serious consequences. To get a proper roof installation, you need to know how to hire the best roofing contractor for your property. Follow this list, do it right, and feel secure in knowing that you chose right.

Pros and Cons of Metal Roof Installation

There are many pros and cons to metal roof installation. Though the benefits are numerous, there are also some drawbacks. We’ve done our best to provide an unbiased analysis on the pros and cons of metal roofing.

Pro: Long Life

When a metal roof is properly installed, it should last as long as fifty years and possibly more. In many cases, it lasts as long as the house.

Metal roof installation done right seals out water, prepares your roof to survive high winds, and easily will be able to shake off accumulating snow. Also resistant to fire, mildew, insects, and rot, there’s not much that can bring this material down.

Con: Initial Cost

When you first buy a metal roof, it’s going to cost more initially than traditional shingles. Typically costs can be as high as $600 per 100 square feet. This is in line with other premium materials.

Because of its high durability, metal roof panels tend to save you more in the long-run by eliminating the seasonal maintenance and occasional replacement that traditional shingles offer. If you plan on staying in your home for a decade or longer, going with a metal roof will actually help save on cost over the years.

Pro: Lightweight

Traditional tile is 750 pounds per 100 square feet, concrete tile is 900 pounds per 100 square feet, and metal roofing easily outdoes both of these numbers at anywhere between 50 and 150 pounds per 100 square feet depending on the variety purchased.

This means less stress on the structure of your home, and ultimately a roof that is able to withstand snow and ice longer and more effectively.

Pro: Easy Installation

Metal roofing materials come in multiple shingle sections that simply need to have their panels interlocked for the most part. Any accomplished contractor can install these quickly and easy.

Pro: Better Heat Conduction

Metal reflects the radiant heat from the sun. This minimizes heat gain, saving you energy in the summer on air conditioning. The dead-air space between metal and roof deck also increases energy efficiency by providing better ventilation.

Pro: Shed Rain and Snow Easy

Living in an area where there’s always the threat of a major snowstorm can wreck a roof over time. Metal roofing is near imperious to rain and snow due to the interlocking nature of the design. Because the surfaces are hard and slippery, any snow or ice will fall right off.

Con: Denting

Just like when a golf ball cracks into a car, any hail stones that fall from the sky may end up leaving dents. The sensitivity to denting varies depending on the exact metal product purchased so it is worth keeping in mind and even asking about to your manufacturer.

As evidenced, there are numerous pros and cons to metal roof installation to keep in mind when deciding on whether to choose metal as your roofing material. If the upfront cost is not a problem, metal is still among the most highly recommended roofing materials in Canada.

5 Reasons you Need to Hire a Professional Roofing Contractor

There’s a lot of jobs that you do not need to hire a professional contractor for. Roofing however is not the easiest install to make and there is plenty that can leave you with a roof installed incorrectly.

You Need to Hire a Professional Roofing Contractor

When it comes to hiring a professional roofing contractor, it is almost a necessity. Here are five reasons why you might want to consider hiring a professional roofing contractor to get the job done.

It’s Safer

If you fall off your roof, it’s going to leave you with some serious injuries. The risk of falling is high for anyone who does not regularly find themselves on roofs. Also, there’s always the risk of accidentally dropping something that rolls off the roof. A professional roofing contractor knows how to walk on roofs, how to protect themselves in the event of a fall, and the safest possible way to complete an installation.

You get a Proper Installation Guaranteed

An experienced roofing contractor knows how to install a roof properly. Via a correct installation, you can bet your bottom dollar that you will have the insulation in place to protect your home from water damage and moisture issues.

High Quality Materials

Shopping for roofing materials yourself without using a roofing contractor leaves you vulnerable to buying materials that are not of the highest quality. When you go to a professional roofing installer, they likely have access to higher quality products through industry suppliers who are willing to offer them better wholesale pricing than you can find anywhere else.

This translates to a higher quality product, architecture that is going to be more visually appealing, and a root that is ultimately built better and that will thereby last longer.

Get it Done Fast

Many roofing installations take a day to get started and finish. Professional roofers will even sometimes brave inclement weather to get the job done, unless it poses a danger to the team or project. By hiring a professional, you can ensure that the job will get done fast and effectively.

Best reason of them all is you get a Warranty!

When you buy into a professional roofing contractor and installation service, more often than not you will get a warranty on any work done. This means that not only are the materials protected under warranty but the actual installation is as well. If there are any issues with your roof in the years that follow, you should be able to receive repairs at no extra charge. Relax knowing that if there’s ever a leak or tiles come loose, a professional roofer can be right there to fix everything.

Jumping into the reasons to hire a professional roofing contractor, it is evident why so many go this route. There are some DIY products on the marketplace for homeowners to buy but these sometimes use lesser quality materials and in addition, you have to find a way to install it yourself. Hiring a professional roofing contractor gets you these advantages and the peace of mind of knowing that you are in trusted hands. For these reasons among others, a professional roofing contractor is well worth the consideration!