Tips to Install a Metal Roof on a House

High performance metal roofs in Ontario are amazing. They last long, are able to withstand some pretty tough weather, and have been used for decades as a cost-effective alternative to traditional asphalt. Installing a metal roof on a house can present some challenges though. For those who wish to install their own metal roof, it’s going to take some work. Once you get the hang of it, we’re sure it won’t seem so complicated.

Get your roof measurement

Prior to buying, get your roof’s measurements so you know how many panels you need to buy. Don’t estimate. Get up there and measure length by width. If there are any questions about how many panels your final measurement equates, speak with a representative.

Follow the instruction manual

Above all else, when you receive your metal roof panels in Ontario, hang onto the manufacturer’s instructions. These are imperative to ensuring your roof is properly installed. When panels have not been interlocked correctly, that could result in leaks.

Attach safety anchors

Follow the instructions and install safety anchors on which you can connect a safety harness. When installing your metal roof, safety should always come first. Most harnesses secure around the chest. Be sure that the harness is properly worn and strapped.

Start at the bottom left or right

When beginning the metal roof installation process, start at either the bottom left or bottom right. Hook the bottom of the metal roof panel to the corner and fasten it securely. Always start in a corner and work your way out from there.

Ensure panels are properly locked

Make sure your panels are properly interlocked and hooked. After the hook is in, you should be able to slide everything into place until it locks. Continue this process with every panel until your reach the edge of the roof.

Cut panels to the appropriate length

If you haven’t received precut metal panels, you will need to use cutters to chop down a panel to the appropriate length to pair it to the edge of the roof. Be sure to speak with your supplier about this. They may recommend an alternative to cutting the panels yourself.

Know that it may take a few days

Getting the panels into place can take a few days so take your time and don’t rush. It’s much more important for every panel to be properly interlocked than it is to get the job done in a fast fashion. To this point, hiring a helper that you trust to work alongside you can help get things done quicker without having to sacrifice quality on the job.

Depending on the features of your roof and what panels need to accommodate in design, there may be other considerations to make. Before you make a purchasing decision, if you’re unsure, speak with your supplier. Post-purchase and before you get started on the roof, be sure that all your tools are good to go, nothing’s malfunctioning or broken, and that all the supplies you need have arrived. Installing a metal roof on a house in Ontario takes a lot of time and labor. All in all, be sure to take it slow, play it smart, and do it right.

How to Re-Roof your House with Metal Roofing

Climate-ready roofing materials like metal are in high demand across Toronto, Ottawa, Chatham, and other communities in Ontario. Among its numerous advantages, metal roofing provides high durability and greater protection to residential and commercial properties.

For homeowners looking to re-roof their home with metal roofing, doing so is a tough but straightforward process. The first step is removing the old roof which in most cases involves traditional asphalt shingle removal and disposal. Note that in many cases this is not necessary and metal roof can be installed directly on shingles. After the old shingles have been fully removed, roofing underlay needs to be spread over the wood of the room to create a new base. There are two methods of installing sheet metal roofing tiles: 1. Direct baking, where no plywood decking is required or 2. Plywood decking or over existing shingle roof. The second method is suitable for the Canadian needs. It allows to install the sheet metal roofing on plywood or over existing shingle roof.

From here, we get to begin fleshing out and getting into the nitty gritty of re-roofing your house with metal roofing. Decide on what side of the house you want to start with. Then, begin screwing in metal sheets into the wood  and through the underlay. With pitched roofs, the installation of tile profile roofing sheets is usually started at the gable, and with hipped roofs always at the hip. Now, repeat this same process on the other side of the house!

The final steps of installing a metal roof starts with placing metal trim along the edges and at the top peak of the roof. Any trim used should be bent to V-shape to fit over the ridge and then, should be screwed down accordingly. All metal trim and bottom sheet should be screwed down.

That’s everything you need to know on how to re-roof your house with metal roofing. Canadian climates, especially in Ontario, are always changing. Metal is an amazing roofing material because it is built to protect. In order to provide property protection though, it needs to be properly installed. Be sure to consult with the manufacturer or supplier of your metal roofing material to identify any additional information to consider related to its installation. We provide installation manual for those who decide to do the work on their own.

This might seem like a tremendous amount of work and we won’t lie – it is. Re-roofing a residential home with metal roofing takes a lot of man-hours. This is why so many Canadians seeking a metal roof end up hiring roofing contractors to complete the installation. Should you decide to hire professional roofing contractors, ensure that they have the experience and knowledge to do the job done right. Be sure to ask what kind of materials they use, what is included in their warranty, and know what is included under their cost estimate.

As the interest in metal roofing continues to rise and more homeowners in Toronto, Ottawa, Chatham, and other Ontario communities choose to re-roof themselves, knowing the safest, most efficient way to do so is important.

Latest Trends of DIY Steel Roofing in Ontario

2017 is proving to be a record year for steel roofing. A number of Ontario property owners are choosing steel roof panels over lesser roofing materials, for a wide array of different reasons.

Meanwhile, the province’s home improvement and construction markets have been experiencing high economic growth across the regions of Toronto, Chatham, the GTA, and all across Ontario. Keeping this in mind, the latest trends in DIY steel roofing in Ontario reveal several promising discoveries that show a bright future for steel roofing later this year!

Higher Spending in DIY Home Improvement

According to indicators of home improvement activities in North America, home improvement spending has been experiencing a steady rise year over year throughout the decade.

Today, homeowners are likely to spend more money on roofing than ever before. Though all homeowners are working within budgetary limits, steel roofing is an ideal selection as not only is it not that expensive but the slightly higher front-end investment ensures that your property is equipped with a roof lasting up to 50 years and more!

More Popularity in Energy-Efficient Materials

Property owners in Ontario are searching for ways to recoup their home improvement investments in energy-efficient solutions that will save them on those expensive electricity bills year-round.

Steel roofing is a major draw for this reason. Steel roof panels in Ontario provide on average 25 percent in energy savings, compared to traditional asphalt shingles, making it a very smart choice for anyone concerned with energy efficiency.

Choosing the More Long Lasting, Sustainable Option

Consumers in Ontario are looking towards more sustainable roofing solutions. Made from recyclable materials and providing a long-lasting life span, a homeowner should not have to replace their roof for decades, no matter the weather. Other materials are not as fortunate to be able to offer these advantages. For example, take a couple of heavy Ontario winters back to back, and the wind and ice might be enough to require a partial or full replacement of a traditional asphalt shingle roof.

More Growth in Solar Panels

Every year throughout the past decade, use of solar panels in Ontario has been gradually growing. There is far more growth in the solar panel industry than many have let on. Many homeowners are seeking ways to install solar technology on their roofs, to assist in lowering expensive power bills.

This is where having steel roof panels in Ontario provide benefit. Solar panels need to be attached to a property’s roof and the presence of asphalt shingles can be tough because the installation of these panels oftentimes puncture the shingles. This leaves a property owner with a flawed roofing setup, releasing heat in the winter and potentially causing damage as moisture seeps in.

Steel roofing offers a better surface, guarding against penetration and also lasting twice as long, thereby ensuring homeowners are confident that their solar panels are being properly supported.

DIY Roofing in Ontario is About Adding Value!

So much of 2017’s trends in DIY roofing in Ontario are focused on adding value. That’s one thing that steel roofing does better than any other material. Durable, energy efficient, environmentally friendly, trendy in appearance, and adding on average an increase of up to six percent in value, steel roofing is more than worth the price.

Tips For DIY Steel Roofing – Do It Yourself Steel Roof Will Save Money

When it comes to do it yourself steel roofing in Ontario, it is not as easy as it might seem at first. Initially, it may seem as simple as putting up and connecting some panels. The truth is that there’s a lot more intricate work oftentimes lost in DIY steel roofing in Ontario that can result in potentially hundreds of dollars’ worth of damage.

When studying do it yourself steel roofing in Ontario, the best thing to start with is knowing how to prepare. Measure the roof correctly and precisely. Each Ontario steel roofing panel is cut to the exact size required and if panels are too short, you may run into some major expenses down the line. Not knowing the precise measurements of the roof is also going to mean additional work down the road. This is a very common rookie mistake when it comes to do it yourself steel roofing in Ontario. Don’t be caught making that same mistake.

Do It Yourself Steel Roofing Ontario - Eco-Tile

It also bears in mind that any type of Ontario DIY steel roofing installation/repair is highly dangerous and safety should always be maintained as a top priority. Full body harnesses and some sort of fall protection system is highly recommended – potentially including roof anchors, a lifeline, and shock-absorbing lanyard. Any Home Depot, Home Hardware, or Lowe’s should have these ready for purchase. Among the first things you do when beginning on steel roofing in Toronto, steel roofing in Ottawa, or steel roofing in Ontario is to put on the body hardness, have a rope with you, and install the harness prior to doing any measuring work.

If you are new to DIY steel roofing, there are several tools, materials, and supplies that you should have on-hand. These include a carpenter’s hammer or roofing hatchet, a utility knife, a carpenter’s pencil, sheet metal snips, a tape measure, a tool belt, a sheet metal hand seamer and folder, and power tools like a drill or wood cutter. Nails and sealant or caulking also are required in order to perform a steel roofing installation most effectively.

Now we get to the installation. Depending on the exact type of steel roofing selected, the instructions may be different. It is highly important that you do not skip any steps as it relates to the installation and that you get it done right.

Though installing steel roofing can be a daunting task to some, approaching it with an open mind is a very healthy way of getting the job done. If you’re considering installing a steel roof in Ontario, take from the information written here and do your research before getting started.

To many people, the hardest part of the DIY steel roofing process is actually selecting the type of roofing they want. Once the hard part is done, going through the instructions and putting in the work to install it is all pretty straightforward.

Steel roofing is easy to transport and simple to install if one does not take the instructions and preparation process for granted. Don’t take it too hard when you make a mistake because they will happen. As long as they are not too costly, you should be good.

Steel roofs continue to gain in popularity because of their simplicity and economy. Going through the process of installing a steel roof yourself can help save money as well as help to provide a more thorough understanding of a part of your property that oftentimes goes overlooked.