What is the Cost to Replace a Steel Roof in Ontario – read here!

Installing a steel roof in Ontario can seem expensive to Canadians. Just comparing the installation numbers, you’ll find steel to be on average twice as expensive as asphalt shingles. As we look into the numbers though, we actually find steel to be a more cost-effective option.

Why a steel roof in Ontario is more cost-effective is because asphalt is a very low quality material. Asphalt roofing can last up to twelve years but going through some of the harsher Canadian weather, it may need a replacement in as little as six years. Now, compare this to steel which can last upwards of fifty years or more. Steel is a much higher quality material, more environmentally friendly, and able to withstand more climate abuse than its competitors. Thereby over the course of its lifespan, steel is easily the more inexpensive option.

According to estimates done earlier this year in 2018, the average cost to replace a steel roof in Ontario is approximately $10,400. Evidently, depending on the size of the roof and if there are any special accommodations that need to be made, the price to install a steel roof could be lower or higher. For example, on the low end, prices for a steel roof in Ontario fall to $2,100 and on the high end, it can cost upwards of $25,000 and above. Though this pricing is double what one would pay for asphalt, your Ontario property will receive one of the highest quality roofing materials in the market today.

Why Canadians are willing to pay so much for a roof replacement comes down to the advantages of steel as a material. Studies conducted on steel roofing showed how they reduced some households’ energy bill by up to 40 percent and insurance savings at a reduction of up to 30 percent. Steel roofing is also very low maintenance, relatively easy to install, has a strong resale value which is super important for property values, and is a light-weight material meaning less stress on your property’s infrastructure.

By settling for a lesser material, you’re going to get a lesser quality roof replacement. This isn’t like settling for fast food because you weren’t interested in making dinner. For most of us, our property is the most valuable thing we own. By installing a low quality asphalt roof, you run the risk of leaks and ultimately will end up paying more either way in the long-term as its life span slowly runs out. For these reasons, we can’t help but highly recommend steel roofing.

Highly resistant to corrosion and rust, there’s nothing quite like steel roof panels to protect a residential home. Choose from several different colors and styles, and match your steel roof installation or replacement direct to your property and its surroundings. Always be sure to select a roofing contractor you trust to complete the roof replacement. Proper installation will ensure a homeowner gets all the benefits from their steel roofing selection.

For more information, don’t hesitate to contact us today to speak with a representative. We’d be happy to provide some different options for a steel roof replacement in Ontario, ensuring your property receives the best possible value.

5 Questions to Ask Roofing Contractors before you Hire Them

Homeowners routinely have to hire professional roofing contractors to perform metal roof installations, replacements, and repairs. The sometimes unpredictably extreme weather that we have here in North America can take its toll on one’s roof. Before settling down with a professional roofing contractor however, there are some key questions that should be answered.

5 Questions to Ask Roofing Contractors before you Hire Them

Can you see projects that the roofing contractor has done previously?

Irrelevant of what is being offered upfront, you want to know you’re in the hands of someone who is knowledgeable and experienced at their job. Inquire about past projects and assess their workmanship. Ignore the salesmanship, and pay heed to the way the jobsite is kept and the attitudes involved.

What exactly is included in the roof replacement, installation, or repair?

Every professional roofing contractor works a little differently and cost estimates are not always made equal. In addition, there may be additional issues that could significantly increase costs, such as building permits and local legislation. No homeowner wants to cut corners on their metal roofing installation and/or to pursue an illegal installation. Therefore, be sure to know what is included in the estimate and to inquire about if any permits or similar items are required to complete your roofing work.

What is the expectation regarding how a job site will be left at the end of the day?

Roof replacements and/or installations are multi-day jobs in some cases. Throughout this process, you don’t want to leave your house open to the elements. Also, the site should not look like a wreck. At the end of the day, the site should be as tidy as it can be, tarped where/when appropriate, and kept free from safety hazards. If there are any doubts, be sure to write this into the roofing contract prior to hiring.

Does your roofing contractor have workman’s compensation and liability coverage?

Any experienced professional roofing contractor should come with insurance including workman’s compensation and liability. If there are any doubts, seeking a document from the insurance provider addressed to you is not uncommon. A professional contractor may not be willing to go through the effort of providing such a document however asking is not offensive. In the event that someone is hurt or has fallen, you do not want them suing you for medical costs and lost wages. Always confirm that a roofing contractor has the necessary insurance in place.

What sort of warranties are provided with their roofing work?

Note that a manufacturer’s warranty only covers the materials themselves and not the labor. Thereby, it is the responsibility of the contractor to provide a warranty on work completed. A 1-year or 2-year warranty is standard among professional roofing contractors in Ontario. Be sure to have it in writing, ensuring everything is kept on the up-and-up.

No matter where in the province you may be based, hiring the right roofing contractor is imperative. By selecting correctly, you will ensure the installation is carried out properly, work is completed ethically, and that the materials used are cost-effective, high quality, and durable. These are the 5 questions to ask roofing contractors before hiring. Hopefully, the answers will shed light into what is the right option for your home.

How to Re-Roof your House with Metal Roofing

Climate-ready roofing materials like metal are in high demand across Toronto, Ottawa, Chatham, and other communities in Ontario. Among its numerous advantages, metal roofing provides high durability and greater protection to residential and commercial properties.

For homeowners looking to re-roof their home with metal roofing, doing so is a tough but straightforward process. The first step is removing the old roof which in most cases involves traditional asphalt shingle removal and disposal. Note that in many cases this is not necessary and metal roof can be installed directly on shingles. After the old shingles have been fully removed, roofing underlay needs to be spread over the wood of the room to create a new base. There are two methods of installing sheet metal roofing tiles: 1. Direct baking, where no plywood decking is required or 2. Plywood decking or over existing shingle roof. The second method is suitable for the Canadian needs. It allows to install the sheet metal roofing on plywood or over existing shingle roof.

From here, we get to begin fleshing out and getting into the nitty gritty of re-roofing your house with metal roofing. Decide on what side of the house you want to start with. Then, begin screwing in metal sheets into the wood  and through the underlay. With pitched roofs, the installation of tile profile roofing sheets is usually started at the gable, and with hipped roofs always at the hip. Now, repeat this same process on the other side of the house!

The final steps of installing a metal roof starts with placing metal trim along the edges and at the top peak of the roof. Any trim used should be bent to V-shape to fit over the ridge and then, should be screwed down accordingly. All metal trim and bottom sheet should be screwed down.

That’s everything you need to know on how to re-roof your house with metal roofing. Canadian climates, especially in Ontario, are always changing. Metal is an amazing roofing material because it is built to protect. In order to provide property protection though, it needs to be properly installed. Be sure to consult with the manufacturer or supplier of your metal roofing material to identify any additional information to consider related to its installation. We provide installation manual for those who decide to do the work on their own.

This might seem like a tremendous amount of work and we won’t lie – it is. Re-roofing a residential home with metal roofing takes a lot of man-hours. This is why so many Canadians seeking a metal roof end up hiring roofing contractors to complete the installation. Should you decide to hire professional roofing contractors, ensure that they have the experience and knowledge to do the job done right. Be sure to ask what kind of materials they use, what is included in their warranty, and know what is included under their cost estimate.

As the interest in metal roofing continues to rise and more homeowners in Toronto, Ottawa, Chatham, and other Ontario communities choose to re-roof themselves, knowing the safest, most efficient way to do so is important.

How to Avoid Common Mistakes when Installing Metal Roofing

When selecting a metal roofing material and installing the panels on your home, there are many common mistakes that are easily made. Pay close attention to how you install your metal roof panels and be sure to consult this list thoroughly prior to beginning.

Metal Roof Installation

Incorrect Panel Lapping

Installing panels the wrong way is a common mistake that many first-time roofing installers make. Remember, to consult the material supplier on how to install panels correctly. Good suppliers will have video tutorials and printed documentation on installation of their product.

Screwing a Set Incorrectly

Every screw needs to be set correctly. The last thing you want is for them to be too tight or too loose. Always put screws where it is flat in the middle of the panel. If they’re wobbling, check to make sure that your nut driver is in proper working condition.

Don’t use Too Much Sealant

Don’t use sealant or caulk to fix a mistake on your roof. The goal needs to be to waterproof through correct installation and not by covering lazy mistakes with caulk. Any sealant should be a secondary consideration when it comes to waterproofing. When applied, it needs to be under panel or trim where it is protected from the elements because it will last longer there.

Always Measure any Panel Twice prior to Cutting

After a metal roof panel is cut, it can’t be put back together again. The last thing you want to do is measure wrong. Always ensure that you check twice, and then cut. This will keep errors to a minimum at least as it pertains to cutting. Also, ensure you are adequately planning for any penetrations i.e. skylights, attic fans, PVC piping, etc. These require special attention to properly trim and install around these openings.

Assuming Installation is the same for Every Metal Roof

Though some may be similar, always check the instructions prior to installing any metal roof. Depending on the type of panels, special attention may need to be applied to certain areas. Remember, there are varying thicknesses, finishes, and profiles. These factors in addition to the style of the property will be what determines installation.

Over the Edge Paneling is a No-No

Don’t let the metal panel hang over the edge of the roof. Though many may attempt to do otherwise, when you are properly installing a metal roof, it is recommended to ensure paneling only hangs an inch and a half to two inches extending over the edge.

Not enough Screws in your Pipe Flashing

Any penetration in the roof is an area prone to leaking. Pay close attention to how you address penetrations like PVC piping. By only laying in a couple screws and some caulk, that’s not enough to get the job done long-term. The caulk will eventually wear out and then, you’ll have a leak in no time. When installing, ensure sealant is installed underneath the base and that enough screws are placed into the base to keep it in place.

Installing a metal roof is a big project for anyone. Be sure to avoid these common mistakes that have befallen others in the past. Be highly attentive when installing metal roofing as even a minor mistake can require significant re-installation or long-term costs down the line when a leak becomes present.

Pros and Cons of Steel Roofing Installation

Steel roofing is becoming more and more popular for residential homes across North America. These new roofs look great but in large part, there’s still a pretty sizeable percentage of homeowners who don’t know much about steel roofing. As a professional roofing contractor, we want to highlight some of the pros and cons of steel roofing, to help you decide if it’s right for you.

Steel Roofing Pros

Metal roofs have a long life span, with some warranties extending to as high as 20 to 50 years. Resistant to wind, fire, insects, mildew, and deterioration, a metal or steel roof does need to be properly installed though.

The weight of a metal roof is significantly less heavy than a conventional roof. This makes installing on an older house easy because you know it’s not going to require much structural support.

For those of us living in regions where the snow and ice come heavy during winter, metal roofing has a smooth finish allowing that stuff to glide right off. Unlike a traditional asphalt roof, there is no absorption in the material and your steel will be kept near to brand new for a long time.

Metal or steel roofs are also very environmentally friendly. They are easily recycled at the end of their life span.

Most metal roofs can be installed quickly and safely by any trained roofing contractor. Due to the nature of them being easy to install and keeping in mind the interlocking design, it makes it more difficult for a leak to become present. Also, because they are metal and non-combustible, that makes them fireproof as well.

Steel Roofing Cons

The biggest con to steel roofing is likely the upfront cost which is higher than what one would pay for traditional shingles. Depending on the type and look of the metal, it can get costly.

That said, the difference is almost always recouped over time as steel and metal roofs last longer than their asphalt counterparts.

There are a number of other things to consider when it comes to steel roofing, such as being susceptible to scratching or denting when walking on it improperly (we can teach our customers on how to walk on their roof in order to avoid damage). As a material, metal is also more sensitive to temperature expansion and contraction, however properly installed metal panels will compensate for that .

Conclusion

Steel roofing is a newer, premium product that is worth considering for anyone looking to update their property. There are many factors to weigh, yes, however if one can cover the initial cost of material and installation, in the long-term they will be mighty thankful they did.

It’s a big investment installing a steel roof on your home but doing so will provide you with something that is built to last. For more information on what steel roofing type may be right for your property, contact a local professional roofing contractor to advise you.