Tips to Install a Metal Roof on a House

High performance metal roofs in Ontario are amazing. They last long, are able to withstand some pretty tough weather, and have been used for decades as a cost-effective alternative to traditional asphalt. Installing a metal roof on a house can present some challenges though. For those who wish to install their own metal roof, it’s going to take some work. Once you get the hang of it, we’re sure it won’t seem so complicated.

Get your roof measurement

Prior to buying, get your roof’s measurements so you know how many panels you need to buy. Don’t estimate. Get up there and measure length by width. If there are any questions about how many panels your final measurement equates, speak with a representative.

Follow the instruction manual

Above all else, when you receive your metal roof panels in Ontario, hang onto the manufacturer’s instructions. These are imperative to ensuring your roof is properly installed. When panels have not been interlocked correctly, that could result in leaks.

Attach safety anchors

Follow the instructions and install safety anchors on which you can connect a safety harness. When installing your metal roof, safety should always come first. Most harnesses secure around the chest. Be sure that the harness is properly worn and strapped.

Start at the bottom left or right

When beginning the metal roof installation process, start at either the bottom left or bottom right. Hook the bottom of the metal roof panel to the corner and fasten it securely. Always start in a corner and work your way out from there.

Ensure panels are properly locked

Make sure your panels are properly interlocked and hooked. After the hook is in, you should be able to slide everything into place until it locks. Continue this process with every panel until your reach the edge of the roof.

Cut panels to the appropriate length

If you haven’t received precut metal panels, you will need to use cutters to chop down a panel to the appropriate length to pair it to the edge of the roof. Be sure to speak with your supplier about this. They may recommend an alternative to cutting the panels yourself.

Know that it may take a few days

Getting the panels into place can take a few days so take your time and don’t rush. It’s much more important for every panel to be properly interlocked than it is to get the job done in a fast fashion. To this point, hiring a helper that you trust to work alongside you can help get things done quicker without having to sacrifice quality on the job.

Depending on the features of your roof and what panels need to accommodate in design, there may be other considerations to make. Before you make a purchasing decision, if you’re unsure, speak with your supplier. Post-purchase and before you get started on the roof, be sure that all your tools are good to go, nothing’s malfunctioning or broken, and that all the supplies you need have arrived. Installing a metal roof on a house in Ontario takes a lot of time and labor. All in all, be sure to take it slow, play it smart, and do it right.

What is the Cost to Replace a Steel Roof in Ontario – read here!

Installing a steel roof in Ontario can seem expensive to Canadians. Just comparing the installation numbers, you’ll find steel to be on average twice as expensive as asphalt shingles. As we look into the numbers though, we actually find steel to be a more cost-effective option.

Why a steel roof in Ontario is more cost-effective is because asphalt is a very low quality material. Asphalt roofing can last up to twelve years but going through some of the harsher Canadian weather, it may need a replacement in as little as six years. Now, compare this to steel which can last upwards of fifty years or more. Steel is a much higher quality material, more environmentally friendly, and able to withstand more climate abuse than its competitors. Thereby over the course of its lifespan, steel is easily the more inexpensive option.

According to estimates done earlier this year in 2018, the average cost to replace a steel roof in Ontario is approximately $10,400. Evidently, depending on the size of the roof and if there are any special accommodations that need to be made, the price to install a steel roof could be lower or higher. For example, on the low end, prices for a steel roof in Ontario fall to $2,100 and on the high end, it can cost upwards of $25,000 and above. Though this pricing is double what one would pay for asphalt, your Ontario property will receive one of the highest quality roofing materials in the market today.

Why Canadians are willing to pay so much for a roof replacement comes down to the advantages of steel as a material. Studies conducted on steel roofing showed how they reduced some households’ energy bill by up to 40 percent and insurance savings at a reduction of up to 30 percent. Steel roofing is also very low maintenance, relatively easy to install, has a strong resale value which is super important for property values, and is a light-weight material meaning less stress on your property’s infrastructure.

By settling for a lesser material, you’re going to get a lesser quality roof replacement. This isn’t like settling for fast food because you weren’t interested in making dinner. For most of us, our property is the most valuable thing we own. By installing a low quality asphalt roof, you run the risk of leaks and ultimately will end up paying more either way in the long-term as its life span slowly runs out. For these reasons, we can’t help but highly recommend steel roofing.

Highly resistant to corrosion and rust, there’s nothing quite like steel roof panels to protect a residential home. Choose from several different colors and styles, and match your steel roof installation or replacement direct to your property and its surroundings. Always be sure to select a roofing contractor you trust to complete the roof replacement. Proper installation will ensure a homeowner gets all the benefits from their steel roofing selection.

For more information, don’t hesitate to contact us today to speak with a representative. We’d be happy to provide some different options for a steel roof replacement in Ontario, ensuring your property receives the best possible value.

How to Re-Roof your House with Metal Roofing

Climate-ready roofing materials like metal are in high demand across Toronto, Ottawa, Chatham, and other communities in Ontario. Among its numerous advantages, metal roofing provides high durability and greater protection to residential and commercial properties.

For homeowners looking to re-roof their home with metal roofing, doing so is a tough but straightforward process. The first step is removing the old roof which in most cases involves traditional asphalt shingle removal and disposal. Note that in many cases this is not necessary and metal roof can be installed directly on shingles. After the old shingles have been fully removed, roofing underlay needs to be spread over the wood of the room to create a new base. There are two methods of installing sheet metal roofing tiles: 1. Direct baking, where no plywood decking is required or 2. Plywood decking or over existing shingle roof. The second method is suitable for the Canadian needs. It allows to install the sheet metal roofing on plywood or over existing shingle roof.

From here, we get to begin fleshing out and getting into the nitty gritty of re-roofing your house with metal roofing. Decide on what side of the house you want to start with. Then, begin screwing in metal sheets into the wood  and through the underlay. With pitched roofs, the installation of tile profile roofing sheets is usually started at the gable, and with hipped roofs always at the hip. Now, repeat this same process on the other side of the house!

The final steps of installing a metal roof starts with placing metal trim along the edges and at the top peak of the roof. Any trim used should be bent to V-shape to fit over the ridge and then, should be screwed down accordingly. All metal trim and bottom sheet should be screwed down.

That’s everything you need to know on how to re-roof your house with metal roofing. Canadian climates, especially in Ontario, are always changing. Metal is an amazing roofing material because it is built to protect. In order to provide property protection though, it needs to be properly installed. Be sure to consult with the manufacturer or supplier of your metal roofing material to identify any additional information to consider related to its installation. We provide installation manual for those who decide to do the work on their own.

This might seem like a tremendous amount of work and we won’t lie – it is. Re-roofing a residential home with metal roofing takes a lot of man-hours. This is why so many Canadians seeking a metal roof end up hiring roofing contractors to complete the installation. Should you decide to hire professional roofing contractors, ensure that they have the experience and knowledge to do the job done right. Be sure to ask what kind of materials they use, what is included in their warranty, and know what is included under their cost estimate.

As the interest in metal roofing continues to rise and more homeowners in Toronto, Ottawa, Chatham, and other Ontario communities choose to re-roof themselves, knowing the safest, most efficient way to do so is important.

How to Avoid Common Mistakes when Installing Metal Roofing

When selecting a metal roofing material and installing the panels on your home, there are many common mistakes that are easily made. Pay close attention to how you install your metal roof panels and be sure to consult this list thoroughly prior to beginning.

Metal Roof Installation

Incorrect Panel Lapping

Installing panels the wrong way is a common mistake that many first-time roofing installers make. Remember, to consult the material supplier on how to install panels correctly. Good suppliers will have video tutorials and printed documentation on installation of their product.

Screwing a Set Incorrectly

Every screw needs to be set correctly. The last thing you want is for them to be too tight or too loose. Always put screws where it is flat in the middle of the panel. If they’re wobbling, check to make sure that your nut driver is in proper working condition.

Don’t use Too Much Sealant

Don’t use sealant or caulk to fix a mistake on your roof. The goal needs to be to waterproof through correct installation and not by covering lazy mistakes with caulk. Any sealant should be a secondary consideration when it comes to waterproofing. When applied, it needs to be under panel or trim where it is protected from the elements because it will last longer there.

Always Measure any Panel Twice prior to Cutting

After a metal roof panel is cut, it can’t be put back together again. The last thing you want to do is measure wrong. Always ensure that you check twice, and then cut. This will keep errors to a minimum at least as it pertains to cutting. Also, ensure you are adequately planning for any penetrations i.e. skylights, attic fans, PVC piping, etc. These require special attention to properly trim and install around these openings.

Assuming Installation is the same for Every Metal Roof

Though some may be similar, always check the instructions prior to installing any metal roof. Depending on the type of panels, special attention may need to be applied to certain areas. Remember, there are varying thicknesses, finishes, and profiles. These factors in addition to the style of the property will be what determines installation.

Over the Edge Paneling is a No-No

Don’t let the metal panel hang over the edge of the roof. Though many may attempt to do otherwise, when you are properly installing a metal roof, it is recommended to ensure paneling only hangs an inch and a half to two inches extending over the edge.

Not enough Screws in your Pipe Flashing

Any penetration in the roof is an area prone to leaking. Pay close attention to how you address penetrations like PVC piping. By only laying in a couple screws and some caulk, that’s not enough to get the job done long-term. The caulk will eventually wear out and then, you’ll have a leak in no time. When installing, ensure sealant is installed underneath the base and that enough screws are placed into the base to keep it in place.

Installing a metal roof is a big project for anyone. Be sure to avoid these common mistakes that have befallen others in the past. Be highly attentive when installing metal roofing as even a minor mistake can require significant re-installation or long-term costs down the line when a leak becomes present.

Pros and Cons of Steel Roofing Installation

Steel roofing is becoming more and more popular for residential homes across North America. These new roofs look great but in large part, there’s still a pretty sizeable percentage of homeowners who don’t know much about steel roofing. As a professional roofing contractor, we want to highlight some of the pros and cons of steel roofing, to help you decide if it’s right for you.

Steel Roofing Pros

Metal roofs have a long life span, with some warranties extending to as high as 20 to 50 years. Resistant to wind, fire, insects, mildew, and deterioration, a metal or steel roof does need to be properly installed though.

The weight of a metal roof is significantly less heavy than a conventional roof. This makes installing on an older house easy because you know it’s not going to require much structural support.

For those of us living in regions where the snow and ice come heavy during winter, metal roofing has a smooth finish allowing that stuff to glide right off. Unlike a traditional asphalt roof, there is no absorption in the material and your steel will be kept near to brand new for a long time.

Metal or steel roofs are also very environmentally friendly. They are easily recycled at the end of their life span.

Most metal roofs can be installed quickly and safely by any trained roofing contractor. Due to the nature of them being easy to install and keeping in mind the interlocking design, it makes it more difficult for a leak to become present. Also, because they are metal and non-combustible, that makes them fireproof as well.

Steel Roofing Cons

The biggest con to steel roofing is likely the upfront cost which is higher than what one would pay for traditional shingles. Depending on the type and look of the metal, it can get costly.

That said, the difference is almost always recouped over time as steel and metal roofs last longer than their asphalt counterparts.

There are a number of other things to consider when it comes to steel roofing, such as being susceptible to scratching or denting when walking on it improperly (we can teach our customers on how to walk on their roof in order to avoid damage). As a material, metal is also more sensitive to temperature expansion and contraction, however properly installed metal panels will compensate for that .

Conclusion

Steel roofing is a newer, premium product that is worth considering for anyone looking to update their property. There are many factors to weigh, yes, however if one can cover the initial cost of material and installation, in the long-term they will be mighty thankful they did.

It’s a big investment installing a steel roof on your home but doing so will provide you with something that is built to last. For more information on what steel roofing type may be right for your property, contact a local professional roofing contractor to advise you.