Tips to Install a Metal Roof on a House

High performance metal roofs in Ontario are amazing. They last long, are able to withstand some pretty tough weather, and have been used for decades as a cost-effective alternative to traditional asphalt. Installing a metal roof on a house can present some challenges though. For those who wish to install their own metal roof, it’s going to take some work. Once you get the hang of it, we’re sure it won’t seem so complicated.

Get your roof measurement

Prior to buying, get your roof’s measurements so you know how many panels you need to buy. Don’t estimate. Get up there and measure length by width. If there are any questions about how many panels your final measurement equates, speak with a representative.

Follow the instruction manual

Above all else, when you receive your metal roof panels in Ontario, hang onto the manufacturer’s instructions. These are imperative to ensuring your roof is properly installed. When panels have not been interlocked correctly, that could result in leaks.

Attach safety anchors

Follow the instructions and install safety anchors on which you can connect a safety harness. When installing your metal roof, safety should always come first. Most harnesses secure around the chest. Be sure that the harness is properly worn and strapped.

Start at the bottom left or right

When beginning the metal roof installation process, start at either the bottom left or bottom right. Hook the bottom of the metal roof panel to the corner and fasten it securely. Always start in a corner and work your way out from there.

Ensure panels are properly locked

Make sure your panels are properly interlocked and hooked. After the hook is in, you should be able to slide everything into place until it locks. Continue this process with every panel until your reach the edge of the roof.

Cut panels to the appropriate length

If you haven’t received precut metal panels, you will need to use cutters to chop down a panel to the appropriate length to pair it to the edge of the roof. Be sure to speak with your supplier about this. They may recommend an alternative to cutting the panels yourself.

Know that it may take a few days

Getting the panels into place can take a few days so take your time and don’t rush. It’s much more important for every panel to be properly interlocked than it is to get the job done in a fast fashion. To this point, hiring a helper that you trust to work alongside you can help get things done quicker without having to sacrifice quality on the job.

Depending on the features of your roof and what panels need to accommodate in design, there may be other considerations to make. Before you make a purchasing decision, if you’re unsure, speak with your supplier. Post-purchase and before you get started on the roof, be sure that all your tools are good to go, nothing’s malfunctioning or broken, and that all the supplies you need have arrived. Installing a metal roof on a house in Ontario takes a lot of time and labor. All in all, be sure to take it slow, play it smart, and do it right.

Types of Metal Roofing Materials – Pros and Cons

Metal roofing in Ontario is long-lasting with a lifespan of up to sixty years, highly resistant to corrosion and the roughest of Canadian weather, and environmentally friendly. Steel, aluminum, and copper are the three most popular metal roofing materials selected for residential and commercial application. Though we think of ‘metal roofing’ being a steel roof, there are some options. Please feel encouraged to browse below for more information on the different types of metal roofing materials, and their respective pros and cons.

Steel

Steel is the most popular metal roofing material in Canada, being selected by the vast majority of homeowners for their properties. Steel itself has several options with is definitely a pro when trying to pair it with the aesthetic of a home. Though initially used more as a commercial roofing product, steel is more common in residential settings today as it’s highly adaptable from an aesthetic standpoint. Another pro to steel is that it has a high recyclability rating and the availability of recycled steel means that a lot of what we use to make steel roofing is from recycled sources. Steel is the least expensive metal roofing product in Canada and is one of the most recycled materials in the world.

Aluminum

Aluminum is long-lasting similar to steel and boasts high resistance to salt water corrosion. Aluminum is perfect for saltier regions and coastal climates. That said, its durability is slightly lower than steel and other metals. The downside to aluminum is that it is costlier than steel. Then again, you get what you pay for. Aluminum’s strength to weight ratio is higher than steel. If one does decide to go with an aluminum metal roof, it’s important to speak with the roofing contractor to determine whether it’s the most appropriate option for your region and where your property is situated.

Copper

Copper is a less popular metal roofing material these days but it’s been used for centuries. Copper can last up to two hundred years, are 100% recyclable, soft, and with a low melting temperature, copper makes for a good high-performance roof. The softness of copper means that it does not produce much noise when it rains however it is prone to hail damage. These roof bends may not be the most aesthetically pleasing but they themselves show a resilient roof. A major con of copper roofing is that it is very, very expensive which for most Canadian households, will put it out of consideration for a metal roof replacement.

Choose what’s right for your property

Finding a metal roofing contractor who is experienced and knowledgeable about metal roofing products may have a recommendation to provide. If not, choose what’s right and most appropriate for your needs.

Steel, aluminum, and copper all have their place however depending on the budget for one’s roof replacement and the specific requirements of the region a property is set in, one may be more inclined to go with one over the others.

metal roof material

Every metal roofing material comes with its advantages. Copper is one of the most aesthetically pleasing however it is the most soft and expensive. Aluminum is great for certain regions of Canada and is less expensive than copper. Then, steel is less expensive, more affordable, and delivers a powerful punch of a performance you’ll love. Choose the metal listening to the roofing contractor you choose, the location of the build, and any other considerations your property may have.

What is the Cost to Replace a Steel Roof in Ontario – read here!

Installing a steel roof in Ontario can seem expensive to Canadians. Just comparing the installation numbers, you’ll find steel to be on average twice as expensive as asphalt shingles. As we look into the numbers though, we actually find steel to be a more cost-effective option.

Why a steel roof in Ontario is more cost-effective is because asphalt is a very low quality material. Asphalt roofing can last up to twelve years but going through some of the harsher Canadian weather, it may need a replacement in as little as six years. Now, compare this to steel which can last upwards of fifty years or more. Steel is a much higher quality material, more environmentally friendly, and able to withstand more climate abuse than its competitors. Thereby over the course of its lifespan, steel is easily the more inexpensive option.

According to estimates done earlier this year in 2018, the average cost to replace a steel roof in Ontario is approximately $10,400. Evidently, depending on the size of the roof and if there are any special accommodations that need to be made, the price to install a steel roof could be lower or higher. For example, on the low end, prices for a steel roof in Ontario fall to $2,100 and on the high end, it can cost upwards of $25,000 and above. Though this pricing is double what one would pay for asphalt, your Ontario property will receive one of the highest quality roofing materials in the market today.

Why Canadians are willing to pay so much for a roof replacement comes down to the advantages of steel as a material. Studies conducted on steel roofing showed how they reduced some households’ energy bill by up to 40 percent and insurance savings at a reduction of up to 30 percent. Steel roofing is also very low maintenance, relatively easy to install, has a strong resale value which is super important for property values, and is a light-weight material meaning less stress on your property’s infrastructure.

By settling for a lesser material, you’re going to get a lesser quality roof replacement. This isn’t like settling for fast food because you weren’t interested in making dinner. For most of us, our property is the most valuable thing we own. By installing a low quality asphalt roof, you run the risk of leaks and ultimately will end up paying more either way in the long-term as its life span slowly runs out. For these reasons, we can’t help but highly recommend steel roofing.

Highly resistant to corrosion and rust, there’s nothing quite like steel roof panels to protect a residential home. Choose from several different colors and styles, and match your steel roof installation or replacement direct to your property and its surroundings. Always be sure to select a roofing contractor you trust to complete the roof replacement. Proper installation will ensure a homeowner gets all the benefits from their steel roofing selection.

For more information, don’t hesitate to contact us today to speak with a representative. We’d be happy to provide some different options for a steel roof replacement in Ontario, ensuring your property receives the best possible value.

How to Re-Roof your House with Metal Roofing

Climate-ready roofing materials like metal are in high demand across Toronto, Ottawa, Chatham, and other communities in Ontario. Among its numerous advantages, metal roofing provides high durability and greater protection to residential and commercial properties.

For homeowners looking to re-roof their home with metal roofing, doing so is a tough but straightforward process. The first step is removing the old roof which in most cases involves traditional asphalt shingle removal and disposal. Note that in many cases this is not necessary and metal roof can be installed directly on shingles. After the old shingles have been fully removed, roofing underlay needs to be spread over the wood of the room to create a new base. There are two methods of installing sheet metal roofing tiles: 1. Direct baking, where no plywood decking is required or 2. Plywood decking or over existing shingle roof. The second method is suitable for the Canadian needs. It allows to install the sheet metal roofing on plywood or over existing shingle roof.

From here, we get to begin fleshing out and getting into the nitty gritty of re-roofing your house with metal roofing. Decide on what side of the house you want to start with. Then, begin screwing in metal sheets into the wood  and through the underlay. With pitched roofs, the installation of tile profile roofing sheets is usually started at the gable, and with hipped roofs always at the hip. Now, repeat this same process on the other side of the house!

The final steps of installing a metal roof starts with placing metal trim along the edges and at the top peak of the roof. Any trim used should be bent to V-shape to fit over the ridge and then, should be screwed down accordingly. All metal trim and bottom sheet should be screwed down.

That’s everything you need to know on how to re-roof your house with metal roofing. Canadian climates, especially in Ontario, are always changing. Metal is an amazing roofing material because it is built to protect. In order to provide property protection though, it needs to be properly installed. Be sure to consult with the manufacturer or supplier of your metal roofing material to identify any additional information to consider related to its installation. We provide installation manual for those who decide to do the work on their own.

This might seem like a tremendous amount of work and we won’t lie – it is. Re-roofing a residential home with metal roofing takes a lot of man-hours. This is why so many Canadians seeking a metal roof end up hiring roofing contractors to complete the installation. Should you decide to hire professional roofing contractors, ensure that they have the experience and knowledge to do the job done right. Be sure to ask what kind of materials they use, what is included in their warranty, and know what is included under their cost estimate.

As the interest in metal roofing continues to rise and more homeowners in Toronto, Ottawa, Chatham, and other Ontario communities choose to re-roof themselves, knowing the safest, most efficient way to do so is important.

Why Steel is the Best Roofing Material

Steel is a unique material used across many different applications, including in the installation and repair of roofing. Some property owners have chosen steel roofing for their homes and businesses, serving as an alternative over more limited options. As steel material technology has advanced, so has its look, advantages, and function. As a roofing material, steel can be argued as ‘the best’ and it comes down to these four reasons.

The structural strength of steel makes it a highly durable material to use to build a roof from. Accustomed to use in many regions and environments, steel roof panels in Ontario are able to withstand whatever the weather will throw at it. Even in the most severe of winters or hottest of summers, steel panels are not going to burn, turn, crumble, and twist like asphalt shingles will.

The key to ensuring the most durable steel roof however is ensuring a professional roofing contractor has properly installed it. Even with the most advanced of steel roofing materials, if they’ve not been properly installed, it can severely affect its durability.

The next reason as to why steel is the best roofing material is its versatility. Malleable, steel can be bent into the shape it needs to be quite easily. Visually gorgeous, customize steel roof panels to the look or theme you want. Steel roofing in Ontario is able to complement the exterior of any residential home or commercial building, adding significant value to a property in the process.

Why Steel is the Best Roofing Material

Thirdly, steel and metal are both some of the most eco-friendly roofing materials available. Steel roof panels are sometimes made from recycled materials and, after it has outlasted its lifespan, can be recycled again. Also, the strength of steel does not deplete, meaning that it does not need to be replaced anywhere near as often as asphalt which saves on cost. Consuming less energy overall, steel carries with it high environmental sustainability ratings, which are directly associated with its manufacturing and transportation.

The last point as to why we think steel roofing is the best is because of its energy efficiency. Installed correctly, a steel roof will reflect heat meaning lower cooling bills in the summer. At the same time, steel carries with it high moisture control and protection from the cold in the winter.

Searching for the right roofing materials for your Ontario home, you may come across cheaper selections such as asphalt shingles. Though asphalt may have served a purpose at a time in roofing, today’s roofing technology has advanced to the point where asphalt is a lesser quality material.

Asphalt roofs require a replacement every 12-15 years approximately – and in some cases, far shorter. Steel and metal roofing can last as long as fifty years, and oftentimes, they come with warranties that go up to 50 years and longer.

For longevity’s sake, the upfront cost of steel roof panels are worth it when one considers the cost they will have to pay in time having to replace cheaper, less effective roofing materials. Be it residential or commercial, consider steel roofing for your Ontario property. By doing so, you can rest easy knowing that it’ll be value added to your property with a high quality steel roofing product.